Terminator TS Self Timing Metric brakes
The TS Terminator muzzle brake is KG Gunkoted Black & opened out as standard to take a maximum calibre size of .308
It is specifically manufactured to fit onto the factory threaded Blaser’s, Bergara’s, Lithgow’s, Tikka’s, Sako’s, Sauer’s & other rifles with M14, M15 & M16 x 1 muzzle threads with a maximum thread shoulder of 19.95mm, 0.785”
TS with nut is 23mm, 0.905” diameter, 70 mm, 2.76” long, 90 grams, 3.17 oz.
It is available in bead blasted Stainless Steel & coated black
Easy DIY fit, no Gunsmithing required, using the locking nut to index it to the barrel.
Ports are 90 degrees to the ground to minimise debris disturbance
The ports are angled back away from the shooter to minimise shooter discomfort and maximise performance.
The standard through hole is for .308 & requires opening up to 0.025-0.030″ over calibre size if fitted to larger calibres.
.A handy tip is to carefully cut up an alloy drink can then put a strip of alloy between the spanner & the brake flats to help protect its finish, lube muzzle threads before installation
If you would like to use some Loctite or similar please put it on the brake only, not the nut.
The TS’s performance falls between the T2 & T3 Terminator muzzle brakes.